Powerfix PAWSB 12 A1 Bedienungsanleitung PDF herunterladen (Seite 16)

PAWSB 12 A1

Danger of chemical burns! Protect your

eyes and skin against chemical burns caused by

acid (sulphuric acid) upon contact with the bat-

tery! Do not look directly at the connected battery

and use the following: acid-resistant safety glasses,

clothing and gloves! If your eyes or skin come into

contact with sulphuric acid, rinse the aﬀ ected part

of the body with plenty of clear running water and

seek immediate medical assistance!

Ɣ Avoid an electric short-circuit when connecting the

appliance to the battery. Connect the positive pole

terminal clamp only to the positive pole of the bat-

tery. Connect the negative pole terminal clamp only

to the negative pole of the battery.

Ɣ Connect the terminal clamps (“–“ and “+“) only to

the insulated area!

Attention! Avoid damage caused by

improper use!

Ɣ Only use the appliance with the included original

parts!

Ɣ Protect the contact surfaces of the battery.

Connection

Ɣ First connect the red quick-connect terminal clamp

to the positive pole (+) of the battery.

Ɣ Then connect the black quick-connect terminal

clamp to the negative pole (-) of the battery.

The appliance can be fastened to the vehicle chas-

sis during the measurement using the magnetic strip

on the back of the appliance.

Testing a battery and generator

Battery test / start capacity

Ɣ If only the 11.5 volt LED lights up, the charge of the

battery is weak. The battery must be recharged.

Ɣ If the 12 volt LED also lights up, the battery is half

charged. Recharging of the battery is recommended.

Ɣ If the 12.6 volt LED also lights up, the battery is

fully charged and capable of starting.

Attention! Property damage! Before

charging, learn about how to maintain the battery

by reading its operating instructions!

IB_102615_PAWSB12A1_LB5.indd 14 04.07.14 11:52

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

Powerfix PAWSB 12 A1 Bedienungsanleitung Seite 16