
6
Using the Laser Pointer/Cleaning …
PLW 3 A1
GB
Using the Laser Pointer
Aligning the laser beam horizontally
Hold the appliance with the narrow side to the wall, so that the spirit levels ♦
3
and
4
are facing forward.
Place the On/Off switch ♦
5
at the position I to switch the laser on. A laser
beam cross appears.
Align the Laser Spirit Level such that the air bubble in the spirit level ♦
4
lies
exactly in the middle of the markings.
Place the On/Off switch ♦
5
at the position 0 to switch the laser off .
Aligning the laser beam vertically
Hold the appliance with the narrow side to the wall, so that the spirit levels ♦
3
and
4
are facing forward.
Place the On/Off switch ♦
5
at the position I to switch the laser on. A laser
beam cross appears.
Align the Laser Spirit Level such that the air bubble in the spirit level ♦
3
lies
exactly in the middle of the markings.
Place the On/Off switch ♦
5
at the position 0 to switch the laser off .
Cleaning and Care
With the exception of battery exchanges this appliance is maintenance-free.
IMPORTANT
To avoid damage to the appliance, ensure that moisture cannot penetrate it
during cleaning.
Do not use aggr
essive detergents or abrasive materials. ►
These could damage the upper surfaces.
Clean the outer surfaces with a soft and lint-free cloth. ■
Clean the laser exit openings ■
6
with a soft brush.
Store the Laser Spirit Level in a dry and, if possible, dust-free environment. ■
Kommentare zu diesen Handbüchern