Powerfix FURNITURE TRANSPORT SET Bedienungsanleitung PDF herunterladen (Seite 15)

15 GB

Safety notices / Operation / CleaningIntroduction / Safety notices

Only use the furniture transport kit on even

surfaces.

Operation

Placing furniture on

the rolling bases

Verify there is adequate space to work safely.

Remove objects such as other pieces of furni-

ture from about 1.5 m around the rolling

bases

4

.

Note: to prevent unbalanced lifting, always

place the lever arm

2

under the side to be

lifted, paying attention to the load centre.

Grab the lever arm

2

by the handle

3

. This

requires the least amount of force.

Slide the ﬂexible head

1

of the lever arm

2

under the centre of the piece of furniture

(see Fig. A).

Slowly push down on the lever arm

2

to raise

the piece of furniture (see Fig. B).

Keep the lever arm

2

pushed down.

Slide a rolling base

4

under each of the two

raised corners of the piece of furniture

(see Fig. C).

To lower the piece of furniture onto the rolling

bases

4

, slowly raise the lever arm

2

(see Fig. D).

Remove the lever arm

2

.

Repeat these steps on the opposite side of the

furniture.

Note: each rolling base

4

has a swivel base

5

. This allows you to align the rolling bases

4

under the piece of furniture.

Sliding furniture

Align the rolling bases

4

so the casters point

in the same direction.

Move the piece of furniture to the desired

location using the rolling bases

4

.

Removing the rolling bases

Notice:

To prevent unbalanced lifting, always place the

lever arm

2

under the side to be lifted, paying

attention to the load centre.

Centre the swivel head

1

of the lifting arm

2

under the piece of furniture.

Notice:

Grab the lever arm

2

by the handle

3

. This

requires the least amount of force.

Slowly push down on the lever arm

2

to raise

the piece of furniture.

Keep the lever arm

2

pushed down.

Remove the rolling bases

4

.

Slowly raise the lever arm

2

to lower the load

Remove the lever arm

2

.

Repeat these steps on the opposite side of the

furniture.

Troubleshooting

The furniture is very difficult to move.

Align the rolling bases

4

so the casters point

in the same direction.

The piece of furniture can easily tip.

Place the four rolling bases

4

under the out-

side corners of the piece of furniture. The piece

of furniture should be all the way on the four

roller bases

4

.

Cleaning

ATTENTION!

The lever arm

2

and rolling base

4

may be

damaged.

Never clean the lever arm

2

and the four

rolling bases

4

with petrol, solvents cleaners

harmful to plastics.

104019_pow_Moebeltransporter_content_CH.indd 15 05.01.15 15:51

1 2 ... 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare